Technical Library Note // DC-DC CAN Interface Ref: NI-TLN-CONTROLS-DCDCCAN-R1

Nomadic DC-DC Converter CAN Interface Control Document

This document defines the CAN interface for the Nomadic Innovations DC-DC Converter. It is intended for firmware, controls, validation, and systems engineering use, and provides the complete CAN matrix for closed-loop control between the EMS/MCU and DC-DC Converter.

Use this technical library note to review CAN protocol details, selectable 250/500 kbps bitrate support, Motorola Big Endian byte ordering, EMS_DCDC_CTRL, DCDC_PARAMETER, DCDC_ELECTRIC_VALUE, and DCDC_VERSION message definitions, including signal scaling, ranges, error values, and Controller vs DC/DC direction mapping.

Technical Document Preview

Download Full PDF ↓

Official Technical Resource // Nomadic Innovations

Latest Documents

View all

Nomadic DC-DC Converter CAN Interface Control Document

Nomadic DC-DC Converter CAN Interface Control Document

CAN interface specification for the Nomadic DC-DC Converter, including EMS/MCU control messages, DC-DC status messages, electric value reporting, version data, signal scaling, valid ranges, error values, and direction matrix.

Read moreabout Nomadic DC-DC Converter CAN Interface Control Document

Nomadic Google Home Automation Setup Guide

Nomadic Google Home Automation Setup Guide

Connect the Nomadic Controls app to Google Home for hands-free voice control. This support bulletin walks through linking your account, syncing supported devices, and viewing available Google Home voice commands.

Read moreabout Nomadic Google Home Automation Setup Guide

Nomadic App Registration Setup Guide

Nomadic App Registration Setup Guide

Create your new Nomadic / Helix account in the Nomadic Controls app. This support bulletin walks new users through signup, email verification, password creation, and completing registration.

Read moreabout Nomadic App Registration Setup Guide

Nomadic CarPlay & Android Auto Setup Guide

Nomadic CarPlay & Android Auto Setup Guide

Add your favorite Nomadic Controls Tap-to-Run scenes to CarPlay or Android Auto for quick access from your vehicle’s screen. This support bulletin walks through setup, scene selection, and saving your preferred controls.

Read moreabout Nomadic CarPlay & Android Auto Setup Guide

Nomadic AC Automation for High and Low Temperature Conditions Through Pulse

Nomadic AC Automation for High and Low Temperature Conditions Through Pulse

This document provides a concise overview for creating high and low temperature threshold scenes using Helix Pulse device reports. Triggers AC automation only on actual threshold crossings for precise control.

Read moreabout Nomadic AC Automation for High and Low Temperature Conditions Through Pulse