A1 Electric Awning is a 12V DC powered awning built for vans, RVs, camper vans, toy haulers, and overland rigs that need fast shade with practical support. Integrated telescoping legs deploy from the front bar, while the waterproof 480 g/m² PVC canopy, COB LED lighting, aluminum structure, stainless hardware, and manual crank backup make it a strong everyday awning for life on the road. Available in 10' 1", 11' 6", and 13' 1" lengths.
Couldn't load pickup availability
Pickup available at HQ 4-Elkhart, IN
Usually ready in 2-4 daysIncluded mounting plates support flat-surface installs and compatible roof rack installs with at least 6 inches of rack height
Product Type:
Available Lengths:
Maximum Projection:
Canopy Material:
Fabric Performance:
Lighting:
Frame / Case / Brackets:
Hardware:
Motor:
Manual Operation:
Wind Rating:
Standard Mounting Surface:
Included Mounting Plates:
Included mounting plates may be used on flat surfaces or compatible roof racks with at least 6 inches of rack height, allowing the plate to be secured at both the top and bottom with all four bolts.
Roof Rack Mounting:
Possible on compatible roof rack systems when the rack provides enough height, structure, and bolt access for the included mounting plates. Additional or custom solutions may be required depending on rack design.
Curved Surface Mounting:
No standard supported solution. Curved or uneven surfaces must be corrected with a flat, structurally appropriate mounting solution before installation.
Optional Mounting Brackets:
A1 mounting brackets are sold separately and are primarily intended for Sprinter rail applications. They may work with some additional rail systems, but modification may be required.
Helpful Resources:
Download the A1 Installation & Operation Guide
Not included / may be required:
Important note:
Included mounting plates may be used on flat surfaces or compatible roof racks with at least 6 inches of rack height, allowing the plate to be secured at both the top and bottom with all four bolts. Roof rack installs, non-standard mounting points, curved surfaces, or surfaces that do not align with the standard mounting layout may require additional brackets, spacers, backing plates, or custom mounting solutions.
Orders are processed and shipped from Nomadic Innovations in Elkhart, Indiana. Shipping times may vary based on inventory availability, destination, carrier scheduling, and freight requirements for larger awning sizes.
Shipping Notes:
Warranty:
The A1 Electric Awning is covered by Nomadic’s limited 1 year warranty. Warranty coverage depends on proper installation, correct use, and following the installation and operation guide.
Important Warranty Notes:
For support, warranty questions, or installation guidance, contact Nomadic Innovations before modifying the awning or attempting repairs.
A1 Electric Van & RV Awning with Telescoping Support Legs
Add compatible accessories or pair your awning with off-grid cooling and copy the matching discount code for checkout.
Nomadic Awnings · A1 Series
The A1 Electric Awning is built for customers who want fast, powered shade with the practical confidence of integrated support legs. Designed for vans, RVs, camper vans, toy haulers, and overland builds, the A1 delivers an 8.2 ft projection, waterproof 480 g/m² PVC canopy with UV protection and anti-mold performance, built-in COB LED lighting, and a supported setup that feels familiar, stable, and easy to live with at camp.
Unlike a fully legless awning, the A1 uses telescoping support legs integrated into the front bar. That makes it a strong choice for buyers who want a traditional supported awning feel, visible structure once deployed, and a practical side-of-vehicle shade zone for cooking, relaxing, loading gear, or setting up camp.
Choose the A1 if you want electric convenience without giving up the reassurance of physical support.
The A1 is built for buyers who want powered shade, practical support, and a familiar supported awning setup for real travel conditions.
12V Electric Operation
Extend and retract your awning with powered 12V DC operation, giving you fast shade without manually rolling out the canopy every time you stop.
Integrated Support Legs
Telescoping legs are built into the front bar, giving the A1 a practical supported structure once deployed. This is ideal for buyers who prefer visible support and a more traditional awning setup.
Waterproof PVC Canopy
The A1 uses a waterproof 480 g/m² PVC canopy designed for dependable shade coverage and weather-conscious campsite use.
COB LED Campsite Lighting
Integrated COB LED strip lighting adds usable illumination under the awning for evenings at camp, outdoor cooking, loading gear, or relaxing after dark.
Real Campsite Function
The A1 Electric Awning is designed to create usable shade where life around your vehicle actually happens — beside the sliding door, near the camp kitchen, around the RV entry, beside a toy hauler, or at the edge of an overland setup.
With an 8.2 ft projection and integrated telescoping support legs, the A1 gives you a practical covered space for cooking, relaxing, loading gear, staging equipment, or creating a more comfortable entry area around your van, RV, camper van, toy hauler, or overland build.
A quick look at the features that define the A1 Electric Awning.
Supported Structure
Telescoping support legs are built into the front bar, giving the A1 a practical supported setup once deployed. This is the main reason to choose the A1 if you prefer visible support and a more traditional awning feel.
Waterproof Material
Durable waterproof PVC fabric built for shade and weather-conscious campsite coverage.
Camp Visibility
Integrated COB LED strip lighting adds usable illumination under the awning for evenings at camp, outdoor cooking, loading gear, or relaxing after dark.
Backup Operation
The A1 includes a manual crank, giving you a backup way to operate the awning when powered control is not being used or is not available.
Controlled Motion
The A1 uses a tubular motor with internal limit control to manage extension and retraction stop positions. That helps the awning open and close in a more controlled, repeatable way during normal operation.
Mounting & Fitment
The A1 Electric Awning is built for vans, RVs, camper vans, toy haulers, and overland rigs that need powered shade with integrated telescoping support legs. Before ordering, confirm that your mounting surface is flat, structurally capable, and suitable for the included mounting plates.
The included A1 mounting plates may be used on flat surfaces or compatible roof racks with at least 6 inches of rack height, allowing the plate to be secured at both the top and bottom with all four bolts. Bracket spacing, surface strength, wiring route, switch location, sealant needs, and support-leg clearance should all be reviewed before installation.
01
The A1 should be mounted to a flat, structurally capable surface so the awning case sits level and the mounting plates can be secured correctly. Always confirm the surface can support the awning before drilling.
02
The included mounting plates may be used on compatible roof racks when the rack provides at least 6 inches of height. This allows the plate to be secured through both the top and bottom bolt locations.
View A1 Sprinter Rail Brackets
03
Curved, angled, uneven, or non-level surfaces are not a standard direct-mount setup. A flat, structurally appropriate mounting solution may be required before the awning can be installed correctly.
04
Before installation, confirm bracket spacing, surface strength, wiring route, switch location, fuse placement, sealant needs, and support-leg clearance. Planning first helps avoid fitment issues later.
A-Series Comparison
The A1 and A2 are built for different types of buyers. Both are electric A-Series awnings with an 8.2 ft projection, waterproof 480 g/m² PVC canopy with UV protection and anti-mold performance, aluminum construction, stainless hardware, powered operation, built-in COB LED lighting, and Level 5 wind resistance. The real decision is support style: the A1 uses integrated telescoping support legs, while the A2 uses a legless design with reinforced arms and dual COB LED strip lighting.
Best for practical support
Choose the A1 if you want powered shade with integrated telescoping support legs. It is the practical A-Series option for buyers who prefer visible support, a familiar awning setup, and a physically supported side-of-vehicle shade zone.
Best for open side access
Choose the A2 if you want a cleaner legless awning setup with no ground legs in the side zone. The A2 uses reinforced arm construction for buyers who prioritize open access, a premium exterior look, and a less cluttered campsite footprint.
Resources & Support
Review the installation guide, confirm your mounting setup, and find the accessories or support resources you may need before installing your A1 Electric Awning.
Review the A1 Installation & Operation Guide before installing, wiring, adjusting, or operating your awning. Use the spec sheet to confirm key product details before finalizing your setup.
View the A1 Mounting Bracket Kit for Sprinter rail applications. These brackets may work with some additional rail systems, but modification may be required.
View bracket kitExplore the A-Series Receiver & Remote for compatible control options and accessory planning for your electric awning setup.
View control optionEmail Nomadic Innovations if you are unsure about fitment, roof rack height, mounting plate alignment, bracket spacing, or installation requirements.
Contact supportYes. The A1 Electric Awning is a 12V DC powered awning designed for electric extension and retraction when properly wired and installed. A compatible control switch is required and is not included. The A1 also includes a manual crank backup so the awning can be operated manually if powered operation is not available.
The A1 is designed for vans, RVs, camper vans, toy haulers, and overland-style builds with a structurally capable mounting surface. There are no confirmed model-specific vehicle restrictions, but the installation must match the vehicle’s structure, mounting surface, bracket spacing, wiring path, and support-leg placement.
Yes. The A1 Electric Awning includes mounting plates and mounting hardware for standard installation. The included mounting plates may be used on flat surfaces or compatible roof racks with at least 6 inches of rack height, allowing the plate to be secured at both the top and bottom with all four bolts.
Depending on your vehicle, roof rack, wall structure, or mounting surface, you may still need additional fasteners, backing plates, spacers, adapters, sealant, or custom mounting solutions.
Yes. The A1 may be mounted to compatible roof rack systems when the rack provides at least 6 inches of height, proper structure, correct plate alignment, and access for secure top-and-bottom bolt placement.
Roof rack installations are not always a universal bolt-on setup. Rack geometry, mounting strength, bracket spacing, and awning position should be reviewed before installation. Additional fasteners, spacers, backing plates, or custom mounting solutions may be required depending on the rack design.
Not always. The included mounting plates may work on compatible roof racks with at least 6 inches of rack height. The separately sold A1 mounting brackets are primarily intended for Sprinter rail applications. They may work with some additional rail systems, but modification may be required.
Curved surfaces are not supported as a standard direct-mount installation path. The A1 should be mounted to a structurally capable flat mounting surface. If the vehicle or rack area is curved, angled, uneven, or not level, the mounting surface must be corrected with an appropriate flat mounting solution before installation.
The A1 is the supported A-Series awning. It uses integrated telescoping support legs built into the front bar, making it a practical choice for buyers who want visible support and a more traditional awning setup.
The A2 is the legless A-Series awning. It uses reinforced arm construction and is better suited for buyers who want a cleaner side-zone experience with no ground legs in the walking, cooking, or loading area. The A2 also includes dual COB LED strip lighting.
Yes. The A1 includes (1) Rear COB LED strip lighting built into the awning system. This helps provide usable light under the awning for campsite visibility, outdoor cooking, gear loading, and evening use.
The A1 uses 480 g/m² PVC canopy fabric designed for vehicle-based shade and outdoor use. The fabric is waterproof and includes UV protection and anti-mold performance.
The A1 has a Level 5 wind resistance rating, which corresponds to approximately 19–24 mph. Like any awning, it should still be retracted during unsafe wind, heavy rain, storms, snow, or changing weather conditions.
Yes. The A1 includes a hand crank for manual operation. This gives you a backup way to open or close the awning when powered operation is not being used or is not available.
Before installing the A1, confirm that the mounting surface is structurally capable, flat, and properly positioned. You should also confirm bracket spacing, roof rack height if applicable, top-and-bottom bolt access, wiring path, switch location, sealant needs, support-leg placement, and whether your vehicle or roof rack requires additional fasteners, spacers, backing plates, adapters, or custom brackets.
The A1 is not “better” than the A2 in every situation. It is better for buyers who want a practical, supported awning with integrated telescoping legs. The A2 is better for buyers who want a cleaner legless setup with reinforced arms, dual lighting, and more open side access.
